The k-bits are the engineers address of the device. It is an 8 bit quantity of odd parity.
14.2.1 The k-bits of magnetic tape decks for the installations are:-
Geographical |
K-bits |
MTA |
64 |
MTB |
193 |
MTC |
194 |
MTD |
67 |
MTE |
196 |
MTF |
69 |
MTG |
70 |
MTH |
199 |
MTI* |
200 |
*For Ericssons this is MTK
14.2.2 The k-bits of the control Flexowriter for the installations are:-
Geographical |
K-bits |
FLX (input) |
4 |
14.2.3 The k-bits of card readers for the installations are:-
Geographical |
K-bits |
CRA |
224 |
14.2.4 Line printers and card punches are considered together and their k-bits are in the sequence
97, 98, 100, 103
See the appropriate sub-section of 14.1 for these.
14.2.5 The k-bits of character peripheral devices depends on the distribution of these devices on the character control units. See the appropriate sub-section of 14.1 or the following table.
The k-bits are given after the geographical name
|
|
|
|
Installation |
Control Unit I |
Control Unit II |
Control Unit III |
I.C.T. |
FLX(4) or FLO(8) |
|
|
I.C.T. |
FLX(4) or FLO(8)
|
TRA(16) |
TRB(35) |
Turitz |
FLX(4) or FLO(8) |
TRA(16) |
TRB(35) |
Rutherford |
FLX(4) or FLO(8) TRA(1) |
TRB(16) |
TRC(32) |
Norwich |
FLX(4) or FLO(8) |
|
TRA(32)
|
Rothamsted |
FLX(4) or FLO(3) |
|
TRA(32) |
N.P. Bank |
FLX(4) or FLO(8) |
TRB(16) |
TRA(32) |
Beechams
|
FLX(4) or FLO(8) |
|
TRD(32) |
Metal Box
|
FLX(4) or FLO(8) |
TRA(16) |
TRB(32) |
Trygg-Fylgia |
FLX(4) or FLO(8) |
|
TRA(32) |
Cadbury |
FLX(4) or FLO(8) |
|
TRB(32) |
Vickers |
FLX(4) or FLO(8) |
|
TRA(32) |
Ericssons |
FLX(4) or FLO(8) |
|
TRA(32) |